View Cart “Pacific T11 Reservoir” has been added to your cart.
Pacific V-RTX 2080 Plus (ASUS ROG)
Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080 Plus (ASUS ROG)Pacific V-RTX 2080Ti Plus (ASUS ROG)Pacific V-RTX 2080Ti Plus (ASUS ROG)

Pacific V-RTX 2080 Plus (ASUS ROG)

$149.99

Thermaltake Pacific V-RTX 2080 Plus is a full-cover water block for ASUS ROG STRIX RTX 2080 , features CNC machined copper base, 0.5mm internal fin construction, and an aluminum alloy backplate. This high-performance water block fits most of G1/4 fittings, utilizes a universal mounting mechanism that offers tool-less installation, along with compatibility for custom PC builders. The water block is manufactured with a 16.8 million colors LED strip that supports TT RGB Plus software and synchronizes with ASUS, GIGABYTE, MSI, AsRock 5V motherboard RGB software. The Pacific V-RTX 2080 Plus delivers the ultimate cooling performance for gaming, overclocking or other GPU intense tasks.

In stock

SKU: CL-W248-CU00SW-A Categories: , Tag:

Product Description

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.

*Caution: the motherboard signal connector only supports 5V header.

Specification:

P/N CL-W248-CU00SW-A
Compatibility ASUS:ROG-STRIX-RTX 2080
Dimension 22.3 H x 149 W x 285.8 L mm
Input Voltage 5 V
Power Input 6.5 W
Material Copper + Acrylic
Threads G ¼”
Interface USB 2.0 connectors (9 Pin)
System compatibility Windows 7 / 8 / 8.1 / 10

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 3 lbs
Dimensions 10 x 6 x 5 in

Reviews

There are no reviews yet.

Be the first to review “Pacific V-RTX 2080 Plus (ASUS ROG)”