View Cart “Pacific W7 Plus CPU Water Block” has been added to your cart.
pacific_mx1_plus_01
pacific_mx1_plus_03pacific_mx1_plus_04pacific_mx1_plus_05pacific_mx1_plus_06pacific_mx1_plus_01-1pacific_mx1_plus_02_1

Pacific MX1 Plus CPU Water Block

$119.99

A 52.2mm tall copper base CPU water block is uniquely structured with a mirror finish top cover, which becomes transparent once the RGB lights shine under, showing our TT logo and delivering 16.8 million colors of illumination which is supported by TT RGB Plus Software.

In stock

SKU: CL-W299-PL00SW-A Category:

Product Description

Unique Visual Design
The Pacific MX1 Plus CPU Water Block has a top cover made of a vacuum metalizing technique, creating a mirror finish that allows the 12 LEDs to shine under, showing our TT logo. The cylinder side cover with a height of 52.2 mm creates a depth perception for the RGB lighting to display its unique lighting effects unlike other water blocks.
Built-in Water Temperature Sensor
The Pacific MX1 Plus CPU Water Block features a built-in temperature sensor that will pick up the temperature from the passing coolant and transmits the signal to the TT RGB Plus software, this allows users to monitor current temperature immediately whilst controlling its addressable LEDs for color editing.
Mirror Finished Anti-Corrosive Copper Base
Pacific MX Plus CPU Water Block has a copper base with a mirror finished anti-corrosive nickel plating, which is easier for users to spread out the thermal compound and provides exceptional heat transfer while keeping the water block looking as good as new.
Optimal Heat Dissipation with 0.15mm Micro-fin Structure
Thermaltake’s Pacific MX1 Plus CPU Water Block has shrunk fin spacing to 0.15 mm, which is better than most design, forcing the coolant to run through a larger surface, creating the best heat dissipation result.
Universal Compatibility
The Pacific MX1 Plus CPU Water block supports Intel and AMD universal brackets, allowing different CPU users to enjoy fantastic lighting effects after a quick installation.
TT RGB PLUS Ecosystem
Light up your system with almost limitless possibilities and synchronize your TT RGB PLUS compatible products (CPU/VGA water blocks, AIO CPU coolers, PSUs, LED strips, gaming keyboards, headsets, mice and mouse pads) to create a RGB ecosystem that is truly unique to you.
Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately.
  4. Fill the reservoir to the top as it will prevent air from going into the pump.
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 1 lbs
Dimensions 25.6 x 19.6 x 6.9 in

Reviews

There are no reviews yet.

Be the first to review “Pacific MX1 Plus CPU Water Block”